|
New Grapple Home Page
Northeast
Implement Corporate Home Page
Grapples
Rotators
Clamshell Buckets
Hookup Options
Available Quick hitch adaptors
Home
| |
The VALBY GR50HD Grapple combination with the R45 rotator is
suitable for use on compact excavators.
 |
This grapple can be mounted with both a rigid mount or
hanging mount. In the picture to the left the GR56HD is mounted with a rigid IGR 16 rotator |
| |
Valby GR-50 HD |
| Max. gripping width |
50 3/4" |
| Min. opening |
3 1/2" |
| Max. lifting capacity |
3960 lb. |
| Height. open |
26 3/8" |
| Height. closed |
20" |
| Width of wider claw |
11 ½" |
| Working pressure |
2900 psi |
| Jaw material |
Hardox |
| Weight |
231 lb. |
| Rec. Hanging Mount Rotator |
R 45 |
- Modern bypass grapple design.
- Hardox is a prime steel used in the manufacture of high
quality log grapples.
- All Valby grapples have a bronze
bushing at every joint, and every joint has a grease fitting.
- Large, powerful cylinder.
- Double connection rods provide good balance and less stress.
- A belly plate protects the
cylinder from underneath.
- The Valby mini excavator grapple has an excellent geometry.
The form of the claws enables a smooth roll in of the stems. The grapples also close to a
tight minimum opening.
 |
The jaws are made out of Hardox, a prime steel
for grapples. The jaws are almost 5/8" thick. The grease fittings are protected
in exposed areas. |
|
|
 |
The jaws open up to 50 3/4". The
area inside the jaws when closed to where they meet is: 2.37 sq. ft. |
|
