|
New Grapple Home Page
Northeast
Implement Corporate Home Page
Grapples
Rotators
Clamshell Buckets
Hookup Options
Available Quick hitch adaptors
Home
| |
Valby
GR-60
The Valby GR 60 closes down to 3 ½ inches,
and is a good choice for large truck cranes. Although it is too large for loading
logs with a mini- excavator, it could be used if the mini-excavator is handling
bulky, but light materials.
Valby GR-60 |
| Max. gripping width |
60 ½" |
| Min. opening |
3 ½" |
| Max. lifting capacity |
6600 lb. |
| Height. open |
38 3/8" |
| Height. closed |
21" |
| Width of wider claw |
15 " |
| Working pressure |
3625 psi |
| Jaw material |
Hardox |
| Weight |
400 lb. |
| Recommended Rotator: |
R45 or R6, depends
on use |
- Hardox is a prime steel used in the manufacture of high
quality log grapples.
- All Valby grapples have a bronze
bushing at every joint, and every joint has a grease fitting.
- Large, powerful cylinders.
- Double connection rods provide good balance and less stress.
- A belly plate protects the
cylinder from underneath.
- Modern bypass grapple design
- The Valby mini-excavator grapple has an excellent geometry.
The form of the claws enables a smooth roll in of the stems. The grapples also close to a
tight minimum opening.
Every joint has a bronze bearing with a
grease fitting.
|
